Coal Burning Stoves Buying Guide 2017

IgorShubin / Pixabay

If you are looking for a way to cut down on your energy bill, there are plenty of options. This includes the installation of a coal burning stove. With a coal burning stove, you can supply your home with warmth without spending as much on heating.

Look over the following information to learn how to pick out the best coal burning stove. Discover the main features that you should look for and other details that will help you make the best choice.

What is a Coal Burning Stove?

US Stove 2000 EPA Certified Coal Burning Stoves
US Stove 2000 EPA Certified Coal Burning Stove

As the name suggests, a coal burning stove is used for burning coal. This generates heat, which is used to warm your home. They are similar to other heating stoves, such as wood or oil burning stoves. Coal burning stoves are often placed in a basement and connected to an exhaust system and air ducts to deliver heat.

Why Should You Install a Coal Burning Stove?

While a coal burning stove may not seem like the most efficient way to heat your home, you will be surprised once you actually get one of these machines going.

You can actually save money on your heating by adding a coal burning stove. This is partially due to the affordability of coal as a fuel source. There are tons of coal available in the United States.

Along with saving money, you can limit your dependency on gas or electricity to power your furnace. Coal burning stoves do not require electricity – unless you use a stoker stove. Essentially, you are limiting your dependency on the CO2 producing emissions.

What Should You Do Before Installing a Coal Burning Stove?

You need to prepare your home before you install a coal burning stove. There are certain safety concerns associated with the use of a coal burning stove. This includes the fact that it can produce carbon monoxide.

While the threat of carbon monoxide is no greater than any other heating source, you should still install a carbon monoxide detector and a smoke detector near your coal burning stove.

What Type of Coal Should You Burn?

There are several different types of coal that you can purchase. They each have their own advantages and disadvantages. You want to make sure that you choose a coal that is efficient, affordable, and safe.

The four main types of coal include:

• Lignite
• Subbituminous
• Bituminous
• Anthracite

In the past, bituminous coal was a popular choice, until it was discovered that bituminous coal produces high sulfur dioxide emissions. Now, anthracite is the preferred choice. It is the most efficient out of the four types and is still relatively affordable – if you live in the Eastern half of the United States.

About 90 percent or more of the anthracite in the United States comes from Pennsylvania. If you live along the West coast, you may find that the prices of anthracite are a little more expensive.

Hand Fired and Stoker Stoves

The next factor to consider is the type of coal burning stove – hand fired or stoker. With a batch (hand-fired) coal burning stove, you have to add coal to the fireplace by hand. You will need to check on the coals about every 12 hours, rake the coals, and empty the ash pan.

With a stoker stove, you add coal to a hopper and empty the ash pan as needed. You can connect stoker coal burning stoves to your thermostat for temperature control. If you want the most efficient option, a stoker stove is your best option.

The type of stove you choose will also impact the installation process. A hand-fired stove requires a chimney while a stoker stove will require electricity. With either option, you will likely want a professional technician to install your coal burning stove.

A professional can make sure that the stove is properly installed. They will handle the connection to the chimney or an exhaust system and help you choose the perfect location for your new stove.

What Else Should You Know About Coal Burning Stoves?

Coal burning stoves are efficient heaters. For a minimal cost, you can keep your home heated throughout the winter. With the addition of a heating coil, you could get all the hot water that you need. But, there are still a few more factors to consider before adding a coal burning stove to your house.

How do you get rid of ash? When you use a coal burning stove, you are going to generate a lot of ash. You will end up with enough ash that you cannot simply toss it out with the trash. You will need to check with your local trash services. Depending on the region where you live, you may be able to purchase special trash bags and put the coal by the curbside.

Other options include loading the ash in bags in the back of your truck and taking it a local landfill. In some cases, the ash will be repurposed. It can be used for various maintenance tasks, including winter road maintenance, and is even used as a renewable source of energy in some situations.

What should you do with your existing furnace? It is generally recommended that you keep your existing furnace or heater. You can use your existing heater as a backup, in the event that you need to service your coal burning stove or cannot purchase coal.

Another reason for keeping your existing furnace is for going on vacations. When you are going to be away from your home for several days, you may need to keep your home heated.

For example, if you have pets or an aquarium, you will still want to keep your home heated. Since you will not be home to check the stove, you can use your existing furnace to supply heat for the week.

These are just a few recommendations for finding the best coal burning stove. You should take your time and explore all of your options.

Decide whether you want a hand-fired stove or a stoker stove. Consider the location of the stove and then start contacting local HVAC companies and businesses that specialize in coal burning stove installation.

LEAVE A REPLY

Please enter your comment!
Please enter your name here