These days, everyone seems to be trying to limit their carbon footprint. Some people want to help the environment, while others simply want to save money on their energy bill. Whichever reason you have for cutting your energy consumption, purchasing an oil stove can help.
Oil stoves are able to help keep your home heated so that you can spend less during the winter months. Find out how this type of stove can limit your dependency on the power grid.
What is an Oil Stove?
An oil stove is primarily used to generate heat. It is similar to a wood stove, except that instead of burning wood, you are burning oil. These stoves are not meant for cooking and you cannot burn wood or other objects in them. They are solely intended to generate heat.
It is primarily installed in the basement or your lowest floor. They may be combined with your existing duct work in order to deliver heat to your home. You will also need to connect your oil stove to an exhaust system.
What are the Advantages of Using an Oil Stove?
The main reason for choosing an oil stove is to generate heat. But, there are additional advantages to using one of these stoves. For example, with an oil stove, you can enjoy the following benefits:
• You do not need electricity
• They are affordable to operate
• Oil stoves require little maintenance
You do not need electricity to operate an oil stove. The stove is gravity fed, which means that no electricity is required for the oil stove to work. Though, if the oil tank is lower than the stove, you may need an electric pump in order to bring the oil to the burner. Also, if you use a blower or a wall thermostat, you will need electricity to run these components.
Oil stoves are affordable to operate. The cost of replacing the oil in your oil stove is minimal compared to the average home heating costs. You can begin cutting back on your energy bill this winter by installing an oil stove. You will become less dependent on the heat from your furnace – allowing you to slash your energy bills.
Another advantage of using oil stoves is that they require little maintenance. You do not need to get your oil stove serviced as frequently as you would your home furnace. There are fewer components in an oil stove, which means there are fewer components that can stop working.
How Do You Install The Stove?
Typically, you will want to allow a professional to install an oil stove in your home. The reason for this is that you need to connect your oil stove to a chimney or exhaust system. Unless you have experience with duct work, it is always a good idea to leave this job to the professionals.
The oil stove will be placed in a location that helps distribute heat to the rest of the house. This is the reason that oil stoves are often placed in basements or lower floors. Heat rises, which means that your oil stove should be at the lowest point of your house and is also why you need an exhaust system.
Your oil stove will need to be placed on a sturdy, non-combustible surface. For example, you cannot set your stove on carpeting, hardwood floor, or linoleum. You need stable flooring, such as concrete. If you do not have a concrete surface, you can purchase special tiles for installing your oil stove.
During the installation process, it is important to check your home for drafts, especially in the room where your oil stove will be setup. The drafts can limit the effectiveness of the stove. You want the heat to travel up to your home, delivering heat to various rooms before exiting through the attic.
The technician that installs your oil stove may perform an inspection of your home to check for drafts. You can seal drafts from doors and windows, which will increase the efficiency of your oil stove.
After installation, you can easily turn on your stove to begin generating heat. You should make sure that there is fuel in the tank and that the tank is turned on. Then, you will make sure that the bottom of the burn pot is clean. Generally, two inches of fluid are placed into the bottom of the pot and then lit with a match.
Additional Solutions for Cutting Down on Energy Use
Along with using an oil stove, there are plenty of other ways to cut down on your energy usage. One option is to purchase a new thermostat, such as a smart thermostat. These modern thermostats are easy to install and give you more precise control over the temperature in your house.
Keep in mind that for every degree that you lower your thermostat, you can save between 1 and 3 percent on your energy bill. So, along with having an oil stove, you may want to limit the use of your furnace.
If you have trouble keeping heat in your home, you may need to look at weatherproofing solutions. For example, if the upstairs of your house does not have insulation, then a considerable amount of heat can be lost throughout the day.
The bottom line is that limiting your dependency on the power grid to heat your home is not difficult. You just need to look at two main areas – the way that you generate heat and the ability of your house to retain the heat.
In order to retain the heat, your home should be weatherproofed. You should not have drafts coming through your windows and doors. There should also be insulation in place along the upper floors. In order to generate heat, you can dramatically cut your energy use by adding an oil stove.
Remember these suggestions before winter approaches. Consider installing an oil stove during the summer or fall, when prices tend to be a little lower.